Play with the Contact Fire Staff and then clamp on the V3 Hubs to change over to Dragon spinning. This is our heaviest weight dragon staff, with 100mm (4") Kevlar Wicks attached to each end of the aluminium staff and either 6 or 8 dragon spokes attached to the V3 Hubs. This also means more flames, up to 10.
Burns well over 100 times!
Fire resistant Kevlar® wicks withstand 100's of burns, offering super long-lasting flames.
The Kevlar absorbs the fuel, then once lit the fuel is burnt, leaving the Kevlar® in tact.
Light Carbon Fibre
Pro spinners around the world are changing to carbon fibre for its many unique properties including high stiffness, strength, light weight, and corrosion resistance. It's lighter than standard aluminium and that's a good thing. A lighter staff body allows for more control where the weight sits. Directing more weight towards the ends gives a more proportioned weight distribution and an easier balancing experience.
Compact for Travel
Like all Fusion Staffs, they setup in seconds by simply twisting the handle. The key to the system is the highly engineered patented locking mechanism that's simple to use and provides superior strength with no wobble or rattle – That's super important for a balanced flow.
The kit is super compact – packing down to about one-third its size when disassembled. With the solidly machined connector, it has no moving parts and collapses down instantly.
Interchangable
The Fusion system is totally modular and has been designed to fit any 22mm tubing, which means you can swap the ends to glow, fire, contact, or dragon ends.
Fusion 16 - Compact for Travel- Fusion Lite
If you are already on the Fusion train, then this Fusion Lite range just might blow you away. Made of 7075 aerospace grade 16mm aluminum. This is really tough stuff!
Nicely finished in black anodising. This range offers thinner poles for spin, contact and double staffs. Like all Fusion Staffs they setup in seconds by simply twisting the handle. The key to the system is the highly engineered patented locking mechanism that's simple to use and provides superior strength with no wobble or rattle. That's super important for dragon flow.
The kit is super compact, packing down to about one-third its size when disassembled. down. With the solidly machined hinge, it has no moving parts and collapses down instantly.
Interchangable
The Fusion 16 system is totally modular and has been designed to fit any of our 16mm tubing, which means you can swap the ends.
Weight Calculator
To calculate the weight of your staff, add together the weight of 1 handle and 2 ends from the staff length of your choice.
1 x Fusion 16 Handle = 58grams 1 x Fusion 16 Fire End: 1200mm = 55gm 1300mm = 66gm 1400mm = 77gm 1500mm = 88gm 1600mm = 99gm
e.g. To calculate the weight of a Fusion 16 1400mm staff: 58 + 77 + 77 = 212grams
*** Due to size restrictions: This item can only be shipped within Australia.
*** Due to size restrictions: staffs over 100cm can only be sent within Australia by courier. On checkout please select shipping method 'FLAT RATE + OVERSIZE FEE'.
No Rattles
One thing you don't want is rattles. The dragon spokes are securely fitted with set screws to lock them in tight. This also keeps the spokes simple. That means it will fit any 8mm rod. Make your own or buy online from LED to practice spokes. They all fit!
V3 Hub - Three or Four Spokes
Swap and change according to your needs. If you need more FIRE or less weight, you can choose. All from one hub!
Convertible
Fits a number of tube sizes with push in shims. If your preferences change, your hub can too. Currently available for 22mm (7/8inch) - included (no shims required) 19mm (3/4 inch) - available on request
Hubs Off and On in Seconds
No more taking out the wicks to remove the hub. You can now easily remove the hub with one bolt. 3 or 4 turns and it's off!
F3 Hub
The Fusion F3 Dragon Hub is the peak of dragon staff engineering, designed to let you simply twist the hubs on and off by hand - it really couldn't be easier. The adapter integrates Fusion's patented quick release connector with a super lightweight 68gram, 3 spoke dragon hub.
F3 Dragon
Patented Fusion Locking Mechanism
Twist your dragon on/off by hand
Sets up in seconds
Solid
Rattle Free
Lightweight
Ideal for Travel
Precision Engineered 7075 Aluminium
Allows you to change the spokes to Fire, Claws or Glow
Fits 22mm (OD) x 19.1mm (ID)Staff
Quality
Threeworlds' workmanship and quality of materials are unsurpassed worldwide. All of our parts are custom made to our specs, resulting in cohesion and a refined, polished overall feel. The majority of our products are made, assembled, and shipped from one location, so they all undergo consistent rigorous quality control.
Kevlar Wick
The Fusion Contact Fire Staff is fitted with 100mm of fire resistant Kevlar® wicks to withstand 100's of burns, offering super long-lasting flames. The Kevlar® absorbs the fuel, then once lit the fuel is burnt, leaving the Kevlar® intact.
Glow
The custom designed Fusion Glow C5 Light Units allowyou to use hundreds of colour modes, you can personally select the colours and models you like most and save them alongside a selection of our favourites! These light units are also interchangeable with the poi, contact staff, single staff, double staff anddevilsticks. The AAA batteries that come with the C5 unit are also rechargeable. As an optional extra we sell battery rechargers separately so you can recharge the batteries of your staff on the go, in the car, office or at home. Available here.
Fire Safety
Read up on our Fire Safety Guide before you light up to learn how to prepare your new wick, some do's and don'ts to make your fire prop last and, of course, what to do in the case of emergency.
Fire Safety
Read up on our Fire Safety Guide before you light up to learn how to prepare your new wick, some do's and don'ts to make your fire prop last and, of course, what to do in the case of emergency.
C5 Light Unit
Read up on our C5 Light Unit Guide to learn how to use the light unit to its full potential.
Fusion Troubleshooting
Experiencing issues with your Fusion Staff? Watch videos on some troubleshoot tips for your Fusion Products Fusion Troubleshooting
Grip Options
Choose from either Silicone or EPDM grip. See our Grip Guide
Silicone
Gripped with silicone for a super long-lasting, super grippy feel.
Our silicone grip is our most long lasting and grippiest option. It is transparent with a blue-grey tint which allows for markers underneath to be visible which helps when learning dragon play and developing precision in movement.
Lasting three times longer than any other grip, you’ll rarely have to replace it. It is also fully washable to keep it looking and feeling new. Silicone is grippiest when clean and dry, occasional wipe downs to remove any moisture during play may be required depending on the environment and person.
EPDM
Gripped with EPDM for a grippy and comfortable feel.
EPDM is a type of synthetic rubber known for its durability against environmental wear and tear. This grip is tacky and padded with all the hard-wearing benefits.
EPDM stays grippy even even when wet which may make it better suited for play in humid climates. It is also user-replaceable at home with our EPDM Grip available per meter. It has a cushioned feel with a 2mm thickness, perfect for softening catches, this makes it great for beginners and experienced spinners alike.
F-Grip
Gripped with our brand new F-Grip for an ultra grippy and comfortable feel.
F-Grip is made from a natural rubber that is extremely durable against environmental wear and tear. This grip is tacky and padded with all the hard-wearing benefits.
Grippier and more shock-absorbing than other grips. Stays grippy even when wet. Perfect for beginners and experienced spinners alike.
EPDM
Gripped with EPDM Grip for a non-slip cushioned feel.
EPDM is a type of synthetic rubber known for its durability against environmental wear and tear. This grip is tacky and padded with all the hard-wearing benefits.
EPDM stays grippy even even when wet which may make it better suited for play in humid climates. It is also user-replaceable at home with our EPDM Grip available per meter. It has a cushioned feel with a 2mm thickness, perfect for softening catches, this makes it great for beginners and experienced spinners alike.
Product Features
Carbon Fibre
Super Strong
Light
Robust
High Stiffness
Fusion Handle
Patented Fusion Locking Mechanism
Precision Engineered 7075 Aluminium
Solid Feel
Rattle Free
Ideal for Travel
Breaks Down to a Third of its Size
Sets Up in Seconds
Modular System
Fusion Glow
Quality Polycarbonate Tubes
Easily Removable Battery Units
Portable Battery Charger Available
Hundreds of Colour and Light Display Modes
V3 Dragon Hub
Fits 22mm Staff (Outside Diameter)
Additional Adapter to fit 19mm Staff Available Upon Request
Hubs Designed to Change from 6 to 8 Spokes on Same Hub
Remove by Unscrewing Only One Screw
example
Kevlar Wick
Authentic Dupont Kevlar Wicks
100+ Burns Per Wick
The Kevlar absorbs the fuel, then once lit the fuel is burnt, leaving the Kevlar® intact, offering super long-lasting flames.
Silicone Grip
Extremely long lasting
Washable
Maximum Grip when clean and dry
Enviromentally sound, clean product
EPDM Grip
Soft foam grip
Provides excellent grip
Ideal for Contact Spinning
User replaceable. Wraps on
F-Grip
Soft rubber grip.
Provides excellent grip.
Ideal for Contact Spinning.
User replaceable. Backed by 3M tape and easily wraps on.
Sports Grip
Cushion Backed
Excellent Grippiness
Easily Replaceable. Wrapped on with overlap.
Replace often for maximum grip.
Product Specifications
Kit Includes
Kit Materials
Fusion Contact Staff Dimensions
Full Length: 1400mm - 1700mm Handle Length: 400mm Staff Outside Diameter: 22mm Staff Including Grip Outside Diameter: 25mm
Fusion Staff Dimensions
Full Length: 1200mm - 1500mm Handle Length: 400mm Staff Outer Diameter: 22mm Staff Including Grip Outer Diameter: 25mm
Weight Calculator
To calculate the weight of your staff, add up weights from the specs below including staff with correct length, 2 x dragon hubs for each end of your staff, and how ever many wicks you would like.
Optional aluminium end caps. End caps are required for use with V3 Hubs as they protect the end of your staff and add extra strength. They are not needed for F3 or UltraHubs as they screw directly into the tubing.
Note: The light unit comes with a 12 month warranty, covering any manufacturing issues with the light unit. It does not cover water damage, battery acid leaks (from leaving batteries in for extended periods of time) or any other physical damage.
BRILLIANT COLOURS
LUMI LED Glow Poi 1.1 by Threeworlds. Designed locally here in Burleigh Heads Australia, with colour modes inspired by nature and our gorgeous surroundings.
SUPER BRIGHT
The Lumi LED Poi is built for night time glow fun. Just spin and swing them around to create mesmerising light trails in the dark. Perfect for all ages, the LED Poi gives hours of entertainment.
Featuring a super bright LED light unit that illuminates the whole Poi ball; making sure you'll stand out in the night.
FUN COLOUR PATTERNS
The Lumi has 6 preset colour modes. Colour modes include:
Rainbow Fade
Rainbow Strobe
Blue Green Strobe
Red Blue Strobe
Pink Aqua Strobe
White Strobe
EASY TO USE
Simple and easy to operate. There's just one button that turns the staff on/off (hold down for four seconds to turn off) and press once to cycle through each of the colour modes. Easy to replace batteries to keep you glowing anywhere, anytime.
SOFT AND DURABLE DESIGN
Designed by poi spinners, they're made to last so they can take hard knocks and drops... and it's inevitable you'll hit yourself too so we've made the poi balls light and soft so they're gentle on impact.
Make Light with Lumi. Spread Joy & Light Wherever You Go! You Are Awesome! You Are Light!
Make Light with Lumi. Spread Joy & Light Wherever You Go! You Are Awesome! You Are Light!
LUMI LED Glow Poi PRO by Threeworlds. Designed locally here in Burleigh Heads, Australia, with colour modes inspired by nature and our gorgeous surroundings.
We've levelled up our LUMI Poi by making them rechargable and by giving them 4 x the modes. They recharge by connecting to a USB port making them travel friendly. The fun never has to stop! We hope you feel as inspired when you spin these as we did creating them.
These Glow Poi balls are made to be played with; featuring super bright LEDs with 20+ cool new colour modes!
Colour Modes Include:
Be Colourful
Awaken
Love Yourself
Find Your Fire
Let it Go
Sun Shower
Rainbow Child
Spread Love
Soul World
Stay Cool
Trippy
Watermelon
Flower Fields
Ocean
Candy
Pink
Red
Orange
Yellow
Green
Cyan
Blue
Purple
White
One press of a button to turn them on and to cycle through the modes. USB rechargable.
Designed by Threeworlds, they're made to last so they can take hard knocks and drops... and it's inevitable you'll hit yourself too so we've made the poi balls light and soft so they're gentle on impact.
Make Light with Lumi. Spread Joy & Light Wherever You Go! You Are Awesome! You Are Light!
Specifications
1 x Poi Weight = 78 grams
1 x Poi Diameter = 84mm
2 Prong USB C to USB A charging cord.
Poi String is adjustable.
Includes
1 x Pair of Lumi LED Glow Poi (2 x balls with strings and handles) Charging Cables
These Glow Juggling balls are made to be played; with a soft and durable outer shell and 1/3 of its internal volume filled with small plastic beads. This makes the centre of gravity low and the ball remains super stable. The principle is similar to the Russian balls'. The beads move inside the ball to help reduce wobble while in the air.
Size wise we have made them a little oversized, at 84mm, for greater stage presence and more glow. Featuring super bright LEDs with 20+ cool new colour modes!
Lumi Pro Rechargeable LED Juggling ball by Threeworlds. Designed locally here in Burleigh Heads, Australia, with colour modes inspired by nature and our gorgeous surroundings.
We've levelled up our LED Juggling Balls by making them rechargable and by giving them 4 x the modes. They recharge by connecting to a USB port making them travel friendly.
Colour Modes Include:
One press of a button to turn them on and to cycle through the modes. USB rechargable.
Designed by Threeworlds, they're made to last so they can take hard knocks and drops.The fun never has to stop! We hope you feel as inspired when you juggle these as we did creating them.
Specifications
1 x Ball Weight = 130 grams
1 x Ball Diameter = 84mm
2 Prong USB C to USB A charging cord.
example
Engineered LED Kali Sticks
When this much thought goes into a product you can feel it. Every part is extremely well thought out and manufactured to high standards to ensure your Kali Sticks will last.
One Light - Many Modes
The powerful chip and programming on board allow this LED unit to pump out a crazy number of colours and modes. You can select from the 9 presets or create your own with a double tap. The options really are limitless.
Super Durable
These sticks are made from polycarbonate tube. One of the toughest plastics available and the stuff that bullbars on vehicles are made of. The simple but powerful C5 LED unit is protected by a large silicone end cap at the ends. This also adds weight where it's needed.
Bright!
The Concentrate range are famous for their brightness. We pack in the brightest custom made LED diodes you can buy. Each light unit pumps light into the polycarbonate tube that has optical brightener in the mix to refract the light perfectly along the full length of the sticks. The result is a seriously set of Kali Sticks with very vivid colours.
Rechargeable AAA
This staff is powered by standard AAA rechargeable batteries. No waiting around while your staff recharges, just swap out the batteries with a fresh set and keep on spinning! Get 2-4 hours of lights on from each charge.
Optional USB Charger
Add a USB recharger to charge from any USB outlet. Comes with over-charge protection and in a compact and affordable design.
Warranty
The C5 light units comes with a 12 month warranty, covering any manufacturing issues with the light unit. Just get in touch and we will help sort out any issues.
Spiral Claws
Giving you a mesmerising look while spinning!
These Spiral Dragon Claws gives some epic style to your daytime dragon practise. The modular design allows you to position the claws in any configuration you want!
Check out how to set them up and some of our favourite orientations Here.
The claws are made from polyurethane which is super durable and offer brilliant colours.
100grams Per Claw.
8mm Stainless Rod Connection.
Our Ghana Djembe Drum Shells have all been hand carved and hand finished with shea butter to prevent cracking.
These shells can be used to create your own djembe drum for a truly customised experience. All Ghana shells include bottom ring.
Please note as all these drums are hand carved, no two shells or designs are the same. Every drum is unique and one of a kind :)
Our Mahogany Djembe Drum Shells have all been hand carved in Java, Indonesia, from high quality Indonesian plantation sourced Mahogany timber to create unique and long lasting djembe drums.
These shells can be used to skin and rope your own djembe drum for a truly customised experience. Does not include bottom ring.
Please note as all these drums are hand carved, no two shells or designs are the same. Every drum is unique and one of a kind :)
Perfectly weighted at 130grams designed for juggling.
Double stitched for durability, they're made to last.
Made from stretchy faux leather that feels great in your hands.
Filled with plastic pellets, you can take these travelling internationally hassle free.
Dragon Spoke Guide
Dragon Pro Review
Lumi Pro Instruction Guide
Grip Guide
C5 Light Unit Guide
Grip Guide
How to Clean your Fusion Staff
Keep your Fusion parts clean. Dust, dirt or fuel residue can stop your staff from connecting.
Common Issue: If you experience your staff not locking together and continuously turning as you try to set it up, your parts could be dirty. Dirt, dust or fuel residue stops the Cam Bolt from getting traction and engaging stopping it from screwing down and in turn expand the Rubber Bush's which jam inside the fire ends.
Solution: Clean the rubber parts and inside the fire ends where these parts sit. Here's how...
What to do if your Fusion Handle is not fitting into your Fusion Ends
The Rubber Bush's on your handle need to be loose (unexpanded) to be able to fit into your Fusion Ends.
Common Issue: If your handle won't fit into your Fusion Ends the Rubber Bush's are expanded. That is their job when the staff is setup, but not when disassembled.
Solution: You'll simply need to release the Cam Bolt, turning it anti-clockwise unscrewing it which in turn loosens the Rubber Bush's. Here's how....
How to Replace Parts on Your Fusion Staff
Your Fusion Staff will not lock if you are missing any part/s.You'll need to remove the Cam Bolt before you can change or replace any parts.
Common Issue: If your staff isn't locking, check that you have all of your parts on your handle and none are broken. This is what your handle should look like:
Solution: Replace the parts. You'll need an M2 allen/hex key to remove the grub screw that holds the Cam Bolt in.
Make sure that the parts are placed in the correct order and that you do not overtighten the grub screw that holds the Cam Bolt in or it will inhibit it from freely spinning and working..
How to Remove the Cam Bolt
How to replace the parts after you've removed the Cam Bolt...
How does the Fusion locking mechanism works
The Fusion Collapsible system uses our patented compression lock design. By twisting the handle inside the ends the cam bolt screws in and expands the rubbers which basically jams inside the tube making a super solid and stable connection. This is how we get a wobble free staff.
Understanding how your staff works helps you get the most out of your staff and also avoid any issues.
See how it works here...
How to remove a snapped Cam Bolt inside your Fusion End
Stripped V3 Grub Screw Hole This video shows you how to create a new threaded grub screw hole to connect your dragon spoke
How to replace wick on a dragon spoke.
You need to be very precise and make sure that you screw into the small aluminium part on the end of the stainless cable. 1. Once you roll the wick on tight (you could hold that on with rubber bands) then use a vice to hold it firmly in place so it doesn't spin or move as you try to drill it. 2. Using a self tapping screw try to keep in the centre of the wick as you begin to drill the screw, start in reverse and then about half way down change the drilling direction to forward. 3. You will be able to feel when you are drilling into the aluminum metal or if you are slipping off. 4. Check that your wick is securely attached by trying to pull it off by hand.
Fire Safety Guide
Here are some of our best tips to get the most out of your fire props as well as how to light up with the safety of yourself and others in mind.
PREPARING YOUR NEW WICKS
It is important to properly prepare the wick before every burn to ensure you are both lighting up safely as well as prolonging the life of the wick as much as possible.
• Pour your fuel in a safe fuel container that will allow you to immerse your wick completely in the fuel. • Soak the wick in the fuel until it is completely soaked through, approx. 10 mins. • All successive burns only require a short dip in the fuel before burning. Just enough to get the wick wet. • Shake out or spin off excess fuel from the wick after dipping and before lighting. • ALWAYS IGNITE AWAY FROM FUEL CONTAINERS! • It's a good idea to put the flame out before it naturally runs out as this makes sure only the fuel is burnt and stops the wick itself from burning.
MAINTENANCE & CARE
Following proper maintenance care will prolong the life of your fire toys to get as many burns as possible out of them.
• Never leave the wick smouldering – once the flame has burnt out, completely put out with a damp 100% cotton towel. • Check your equipment before each use for any damage, to ensure it is safe to use and spin. • Check for loose screws and tighten if any are loose. • Replace any broken or damaged parts immediately. • Protect the wicks when not in use with wick covers (socks work well for this). • If the wick is frayed, trim before lighting up again. • To prolong the life of your wicks avoid dropping or hitting the Kevlar wicks onto concrete or hard and abrasive surfaces or objects. • Treat your items with care and use as intended.
SPIN SAFELY
As much as spinning with fire is heaps of fun, it's just as important to do it safely. These tips and procedures should always be followed, no matter how many times you've lit up before.
FUEL • We highly recommend our FIRELIGHT FUEL; Itʼs a clean burning, low odour fuel. • Your fuel container should have a secure lid that will not spill if it is knocked over. Always keep your fuel container stored far away from any flames and away from any fire spinning. • Your fuel container should be labelled that it contains flammable and dangerous goods, including the name of the fuel. • Kerosene/Citronella are also options. Each fuel has different properties such as volatility, burning temperature and flashpoint. You can find out these specifications in the chemical's MSDS. • Store fuel away from children and away from where you are spinning and away from where any fire will be.
FIRE SAFETY EQUIPMENT • Always have a fire extinguisher and/or a damp 100% cotton towel on hand. • Fire safety equipment should be kept in close proximity so that easily accessible if needed. • Your fire safety assistant should be trained how to use these items safely and be in charge of where they are located.
WHAT TO WEAR • Never wear loose or highly flammable synthetic clothing (natural, tight fitting fabrics are best). • No dangly items worn. • Keep long hair tied back. • Lightly wet your hair if possible before spinning. • Avoid the use of hairsprays, gels, and other products.
SAFETY ASSISTANT • Never spin alone. You should have someone else with you that is also comfortable around fire and knows first aid for burns. This person should also be watching your surroundings and if in public, act as the 'crowd control' and make sure your spinning area is big enough. • Adult supervision and consent is required for persons under 18 years old.
ENVIRONMENT • Fire spin outdoors only. • Spin on flat ground that is dry and free of any slip hazards. • Do not spin in dry bushland or forests as this can cause bush/forest fires. • Spin away from any obstacles (around and overhead) and be observant to who and what is around you. • Be responsible for your own and otherʼs personal safety. • Please respect any local and/or state fire bans and restrictions. • Obtain any permits if required to spin in public places, varies from county to country.
EQUIPMENT • Be aware of the props that you are spinning with and its intended use and its limitations • Remember that Carbon Fibre is heat proof, but not flame proof. Precautions should be taken with this in mind such as keeping the prop moving to control the flame and taking wind direction into consideration to keep the flame away from you and the Carbon Fibre. • Remember that while Aluminium is flame and heat proof, your hands are not! Aluminium gets very hot where it is close to the flame so you should be careful to only touch the gripped part of the product while spinning to avoid burns. • Products should only be used for its intended use and misuse of products can result in injuries and damage to your toy.
CONTROL THE FLAME • Know the nature of fire. Fire will always burn from the bottom up, so when holding fire stationary be intentional with how you are holding it. For example, hold hoops horizontally so the flame does not touch the tubing. Keep poi gently swaying to keep the heat away from your hands. Hold fans upward away from the body or horizontally away from the body. • Once lit always keep the flame moving, even if slightly, to help control the flame and the heat. Avoid remaining motionless and start spinning and moving the prop as soon as safely possible. • Be aware of the direction of the wind and how it affects the flame. Usually you would want the wind at your back so that it blows the flame away from your body and not toward you.
TRICKS • Never light up until you are comfortable, practiced and confident with the prop without fire. • Take it easy for your first light-up, there's no rush to spin with fire. • Do not learn or practise new tricks when lit-up.
First Aid
In the case of an accident or burn, it's important to know the steps to take before it happens.
WHAT TO DO IF CLOTHING CATCHES FIRE
Follow DRSABCD
Danger - Response - Send for help - Airway - Breathing - CPR - Defibrillation
Remember STOP, DROP & ROLL
Stop the person from moving around.
Drop the person to the ground and cover or wrap them in a fire blanket, 100% cotton wet towel or similar, if available.
Roll the person along the ground until the flames are extinguished.
Extinguish any burning props and ensure the area is safe.
Manage the burn.
FOR ALL BURNS
If the burn is severe or if it involves the airway, call triple zero (000) for an ambulance.
As soon as possible, hold the burnt area under cool running water for 20 minutes.
Remove any clothing and jewellery from the burnt area, unless they are stuck to the burn.
Cover the burn with a light, loose nonstick dressing, preferably clean, dry, non-fluffy material (eg plastic cling film).
Continue to check the patient for shock, and treat if necessary.
Seek medical advice if the burn is larger than a 20 cent piece, or deep.
We use only quality materials to maximise safety, durability and fun. Now you are ready to light up and express your unique self, exploring your skills and becoming part of the worldwide fire community.
Dragon Staff Length
The most common length for a Dragon Staff is anywhere between your chin and nose height. As a general guide measure from the ground to your nose or you simply deduct 150mm from your height to help select your Dragon Staff length.
YOUR HEIGHT
CM
FEET
STAFF LENGTH
150cm - 159cm
4'11" - 5'3"
1400mm
160cm - 174cm
5'3" - 5'9"
1500mm
175cm - 190cm
5'9" - 6'3"
1600mm
191cm +
6'3" +
1700mm
Staff Length
Flute Size Guide
How to Pick a Native American Flute That Will be Right for You
Native American Flutes are a beautiful instrument with a captivating sound. They have a long history dating back to over a thousand years ago and have evolved over time to become the flutes we know today. They are said to have been both a way to communicate in the night as well as a courting instrument to express love.
It's super important to pick the right sized flute for your hands and will make all the difference when you're learning. The size of a flute will dictate the pitch so larger flutes give a deeper and lower tone and smaller flutes will be higher and brighter.
We've divided our flutes into three sizes – small, medium, and deep.
Small flutes are great for younger flutists and for those with small hands, and for those seeking the bright, spritely, pixie-like sounds of a higher pitch. These flutes will suit most hand sizes except very large as the sound holes are smaller and closer together.
Medium is a safe bet for most hands as they are right in the middle and offer a good balance of depth and playability. They have a smooth, warm tone and are incredibly comfortable to play. Those with slightly smaller hands may want to stick to the smaller end of this range such as keys of A, & B. Those with a bit more length in their fingers may find flutes in the key of F & G more comfortable. Deep, and larger, flutes should be reserved for those with large hands with quite long or flexible fingers as the sound holes tend to be wider and spaced further away making it quite a stretch, or even impossible, for most hands to reach. These flutes have an incredibly soothing quality though and are very desirable for meditation music. Flutes in the key or E & D are slightly more playable. Flutes in the key of low A or B are the largest of all flutes and also the lowest tone.
Collapsible Staff PRICE. DISCOUNTED KIT PRICE CALCULATED IN CART
Regular price$125.00 AUD
Regular price$0.00 AUDSale price$125.00 AUD
Unit price/ per
Sale
Sold out
Fusion Modular System
Compact for Travel
Like all Fusion Staffs, they setup in seconds by simply twisting the handle. The key to the system is the highly engineered patented locking mechanism that's simple to use and provides superior strength with no wobble or rattle – That's super important for a balanced flow.
The kit is super compact – packing down to about one-third its size when disassembled. With the solidly machined connector, it has no moving parts and collapses down instantly.
Interchangable
The Fusion system is totally modular and has been designed to fit any 22mm tubing, which means you can swap the ends to glow, fire, contact, or dragon ends.
Fusion Troubleshooting
Experiencing issues with your Fusion Staff? Watch videos on some troubleshoot tips for your Fusion Products Fusion Troubleshooting
Grip Selection Guide
We offer three types of grip for our spinning and Fusion gear: Silicone, EPDM, and F-Grip. Each has their own unique properties; read on to find out which is best suited to you.
SILICONE
Silicone is an environmentally sound, clean product. It's washable and very durable. It's the longest lasting grip and provides excellent grip when dry. It does suffer when wet, whether that be from humidity or sweat, which is it's only real downfall. + Extremely long-lasting – you wont have to replace it often + Excellent grip in dry conditions + Fully washable to keep it looking and feeling new + Transparent so you can see markers underneath for more precise spinning
- Doesn't handle wet conditions/sweat well. You may have to wipe it down with a dry cloth occasionally during use. - More difficult to replace at home - Cannot be used on one-piece staffs
EPDM
EPDM is simply a black foam strip. The foam is soft, grippy and stays grippy in most situations – even when wet. It does leave some black residue on skin after use as the foam is uncoated to maximise grip and it will need to be replaced after a while once it wears out. + Great level of grip + Grippy in wet or dry conditions + User replaceable at home - Wears out – you will have to replace this grip sooner than other grips - Leaves black residue on skin
F-GRIP
F-Grip is our newest grip. The F stands for Fusion as it is our most well-rounded grip yet. It is made of natural rubber which means it stays grippy wet or dry and is durable as well.
+ Great level of grip + Grippy in wet or dry conditions + Durable + User replaceable at home
- Some may find it too grippy and a bit rough on skin - More expensive
*** These grips are different thicknesses meaning that if you mix and match grips on your Fusion Staff the grip will appear and feel uneven. We suggest selecting one grip for your full staff.
The most common length for a Dragon Staff is anywhere between your chin and nose height. As a general guide measure from the ground to your nose or you simply deduct 150mm from your height to help select your Dragon Staff length.
YOUR HEIGHT
CM
FEET
STAFF LENGTH
150cm - 159cm
4'11" - 5'3"
1400mm
160cm - 174cm
5'3" - 5'9"
1500mm
175cm - 190cm
5'9" - 6'3"
1600mm
191cm +
6'3" +
1700mm
Fire Safety
Here are some of our best tips to get the most out of your fire props as well as how to light up with the safety of yourself and others in mind.
PREPARING YOUR NEW WICKS
It is important to properly prepare the wick before every burn to ensure you are both lighting up safely as well as prolonging the life of the wick as much as possible.
• Pour your fuel in a safe fuel container that will allow you to immerse your wick completely in the fuel. • Soak the wick in the fuel until it is completely soaked through, approx. 10 mins. • All successive burns only require a short dip in the fuel before burning. Just enough to get the wick wet. • Shake out or spin off excess fuel from the wick after dipping and before lighting. • ALWAYS IGNITE AWAY FROM FUEL CONTAINERS! • It's a good idea to put the flame out before it naturally runs out as this makes sure only the fuel is burnt and stops the wick itself from burning.
MAINTENANCE & CARE
Following proper maintenance care will prolong the life of your fire toys to get as many burns as possible out of them.
• Never leave the wick smouldering – once the flame has burnt out, completely put out with a damp 100% cotton towel. • Check your equipment before each use for any damage, to ensure it is safe to use and spin. • Check for loose screws and tighten if any are loose. • Replace any broken or damaged parts immediately. • Protect the wicks when not in use with wick covers (socks work well for this). • If the wick is frayed, trim before lighting up again. • To prolong the life of your wicks avoid dropping or hitting the Kevlar wicks onto concrete or hard and abrasive surfaces or objects. • Treat your items with care and use as intended.
SPIN SAFELY
As much as spinning with fire is heaps of fun, it's just as important to do it safely. These tips and procedures should always be followed, no matter how many times you've lit up before.
FUEL • We highly recommend our FIRELIGHT FUEL; Itʼs a clean burning, low odour fuel. • Your fuel container should have a secure lid that will not spill if it is knocked over. Always keep your fuel container stored far away from any flames and away from any fire spinning. • Your fuel container should be labelled that it contains flammable and dangerous goods, including the name of the fuel. • Kerosene/Citronella are also options. Each fuel has different properties such as volatility, burning temperature and flashpoint. You can find out these specifications in the chemical's MSDS. • Store fuel away from children and away from where you are spinning and away from where any fire will be.
FIRE SAFETY EQUIPMENT • Always have a fire extinguisher and/or a damp 100% cotton towel on hand. • Fire safety equipment should be kept in close proximity so that easily accessible if needed. • Your fire safety assistant should be trained how to use these items safely and be in charge of where they are located.
WHAT TO WEAR • Never wear loose or highly flammable synthetic clothing (natural, tight fitting fabrics are best). • No dangly items worn. • Keep long hair tied back. • Lightly wet your hair if possible before spinning. • Avoid the use of hairsprays, gels, and other products.
SAFETY ASSISTANT • Never spin alone. You should have someone else with you that is also comfortable around fire and knows first aid for burns. This person should also be watching your surroundings and if in public, act as the 'crowd control' and make sure your spinning area is big enough. • Adult supervision and consent is required for persons under 18 years old.
ENVIRONMENT • Fire spin outdoors only. • Spin on flat ground that is dry and free of any slip hazards. • Do not spin in dry bushland or forests as this can cause bush/forest fires. • Spin away from any obstacles (around and overhead) and be observant to who and what is around you. • Be responsible for your own and otherʼs personal safety. • Please respect any local and/or state fire bans and restrictions. • Obtain any permits if required to spin in public places, varies from county to country.
EQUIPMENT • Be aware of the props that you are spinning with and its intended use and its limitations • Remember that Carbon Fibre is heat proof, but not flame proof. Precautions should be taken with this in mind such as keeping the prop moving to control the flame and taking wind direction into consideration to keep the flame away from you and the Carbon Fibre. • Remember that while Aluminium is flame and heat proof, your hands are not! Aluminium gets very hot where it is close to the flame so you should be careful to only touch the gripped part of the product while spinning to avoid burns. • Products should only be used for its intended use and misuse of products can result in injuries and damage to your toy.
CONTROL THE FLAME • Know the nature of fire. Fire will always burn from the bottom up, so when holding fire stationary be intentional with how you are holding it. For example, hold hoops horizontally so the flame does not touch the tubing. Keep poi gently swaying to keep the heat away from your hands. Hold fans upward away from the body or horizontally away from the body. • Once lit always keep the flame moving, even if slightly, to help control the flame and the heat. Avoid remaining motionless and start spinning and moving the prop as soon as safely possible. • Be aware of the direction of the wind and how it affects the flame. Usually you would want the wind at your back so that it blows the flame away from your body and not toward you.
TRICKS • Never light up until you are comfortable, practiced and confident with the prop without fire. • Take it easy for your first light-up, there's no rush to spin with fire. • Do not learn or practise new tricks when lit-up.
First Aid
In the case of an accident or burn, it's important to know the steps to take before it happens.
WHAT TO DO IF CLOTHING CATCHES FIRE
Follow DRSABCD
Danger - Response - Send for help - Airway - Breathing - CPR - Defibrillation
Remember STOP, DROP & ROLL
Stop the person from moving around.
Drop the person to the ground and cover or wrap them in a fire blanket, 100% cotton wet towel or similar, if available.
Roll the person along the ground until the flames are extinguished.
Extinguish any burning props and ensure the area is safe.
Manage the burn.
FOR ALL BURNS
If the burn is severe or if it involves the airway, call triple zero (000) for an ambulance.
As soon as possible, hold the burnt area under cool running water for 20 minutes.
Remove any clothing and jewellery from the burnt area, unless they are stuck to the burn.
Cover the burn with a light, loose nonstick dressing, preferably clean, dry, non-fluffy material (eg plastic cling film).
Continue to check the patient for shock, and treat if necessary.
Seek medical advice if the burn is larger than a 20 cent piece, or deep.
We use only quality materials to maximise safety, durability and fun. Now you are ready to light up and express your unique self, exploring your skills and becoming part of the worldwide fire community.
Sushi or Isis
We make two types of fire spokes or wicks for our dragon staff spokes, contact and spin staffs: sushi and isis. They are both made from Kevlar and last over 100 burns before needing to be replaced. The Kevlar absorbs the fuel, then once lit the fuel is burnt, leaving the wick relatively intact.
Sushi
This is our most classic wick design; simple and straightforward, the kevlar is simply tightly rolled - like a sushi roll. They provide a decent sized flame perfect for practicing or performing with.
+ Most versatile + User replaceable at home + Great for beginners and advanced spinners
Isis
Isis wicks are made by braiding kevlar rope to form a dense and mighty wick. It is braided over itself till it reaches the right thickness which gives it a good size wick. It soaks up much more fuel than the sushi wick giving it a bigger flame and longer burn time. This wick is only recommended for more experienced spinners as the braided design can loosen from frequent knocks and drops.
+ Big flame + Long burn time + Neat design
- Not easily user replaceable - Uses a lot more fuel - Heavier - Not suited to beginners/practicing
Please keep in mind the hubs will need to sit approx. 5cm underneath the wick to make the dragon staff. This is approx. 15cm in from the ends of the sushi roll staff and 20cm for the isis weave. The length that you need for a contact-dragon staff will likely be longer than what you need for a regular contact staff.
One thing you don't want is rattles. The dragon spokes are securely fitted with set screws to lock them in tight. This also keeps the spokes simple. That means it will fit any 8mm rod. Make your own or buy online from LED to practice spokes. They all fit!
V3 Hub - Three or Four Spokes
Swap and change according to your needs. If you need more FIRE or less weight, you can choose. All from one hub!
Convertible
Fits a number of tube sizes with push in shims. If your preferences change, your hub can too. Currently available for 22mm (7/8inch) - included (no shims required) 19mm (3/4 inch) - available on request
Hubs Off and On in Seconds
No more taking out the wicks to remove the hub. You can now easily remove the hub with one bolt. 3 or 4 turns and it's off!
Here are some of our best tips to get the most out of your fire props as well as how to light up with the safety of yourself and others in mind.
PREPARING YOUR NEW WICKS
It is important to properly prepare the wick before every burn to ensure you are both lighting up safely as well as prolonging the life of the wick as much as possible.
• Pour your fuel in a safe fuel container that will allow you to immerse your wick completely in the fuel. • Soak the wick in the fuel until it is completely soaked through, approx. 10 mins. • All successive burns only require a short dip in the fuel before burning. Just enough to get the wick wet. • Shake out or spin off excess fuel from the wick after dipping and before lighting. • ALWAYS IGNITE AWAY FROM FUEL CONTAINERS! • It's a good idea to put the flame out before it naturally runs out as this makes sure only the fuel is burnt and stops the wick itself from burning.
MAINTENANCE & CARE
Following proper maintenance care will prolong the life of your fire toys to get as many burns as possible out of them.
• Never leave the wick smouldering – once the flame has burnt out, completely put out with a damp 100% cotton towel. • Check your equipment before each use for any damage, to ensure it is safe to use and spin. • Check for loose screws and tighten if any are loose. • Replace any broken or damaged parts immediately. • Protect the wicks when not in use with wick covers (socks work well for this). • If the wick is frayed, trim before lighting up again. • To prolong the life of your wicks avoid dropping or hitting the Kevlar wicks onto concrete or hard and abrasive surfaces or objects. • Treat your items with care and use as intended.
SPIN SAFELY
As much as spinning with fire is heaps of fun, it's just as important to do it safely. These tips and procedures should always be followed, no matter how many times you've lit up before.
FUEL • We highly recommend our FIRELIGHT FUEL; Itʼs a clean burning, low odour fuel. • Your fuel container should have a secure lid that will not spill if it is knocked over. Always keep your fuel container stored far away from any flames and away from any fire spinning. • Your fuel container should be labelled that it contains flammable and dangerous goods, including the name of the fuel. • Kerosene/Citronella are also options. Each fuel has different properties such as volatility, burning temperature and flashpoint. You can find out these specifications in the chemical's MSDS. • Store fuel away from children and away from where you are spinning and away from where any fire will be.
FIRE SAFETY EQUIPMENT • Always have a fire extinguisher and/or a damp 100% cotton towel on hand. • Fire safety equipment should be kept in close proximity so that easily accessible if needed. • Your fire safety assistant should be trained how to use these items safely and be in charge of where they are located.
WHAT TO WEAR • Never wear loose or highly flammable synthetic clothing (natural, tight fitting fabrics are best). • No dangly items worn. • Keep long hair tied back. • Lightly wet your hair if possible before spinning. • Avoid the use of hairsprays, gels, and other products.
SAFETY ASSISTANT • Never spin alone. You should have someone else with you that is also comfortable around fire and knows first aid for burns. This person should also be watching your surroundings and if in public, act as the 'crowd control' and make sure your spinning area is big enough. • Adult supervision and consent is required for persons under 18 years old.
ENVIRONMENT • Fire spin outdoors only. • Spin on flat ground that is dry and free of any slip hazards. • Do not spin in dry bushland or forests as this can cause bush/forest fires. • Spin away from any obstacles (around and overhead) and be observant to who and what is around you. • Be responsible for your own and otherʼs personal safety. • Please respect any local and/or state fire bans and restrictions. • Obtain any permits if required to spin in public places, varies from county to country.
EQUIPMENT • Be aware of the props that you are spinning with and its intended use and its limitations • Remember that Carbon Fibre is heat proof, but not flame proof. Precautions should be taken with this in mind such as keeping the prop moving to control the flame and taking wind direction into consideration to keep the flame away from you and the Carbon Fibre. • Remember that while Aluminium is flame and heat proof, your hands are not! Aluminium gets very hot where it is close to the flame so you should be careful to only touch the gripped part of the product while spinning to avoid burns. • Products should only be used for its intended use and misuse of products can result in injuries and damage to your toy.
CONTROL THE FLAME • Know the nature of fire. Fire will always burn from the bottom up, so when holding fire stationary be intentional with how you are holding it. For example, hold hoops horizontally so the flame does not touch the tubing. Keep poi gently swaying to keep the heat away from your hands. Hold fans upward away from the body or horizontally away from the body. • Once lit always keep the flame moving, even if slightly, to help control the flame and the heat. Avoid remaining motionless and start spinning and moving the prop as soon as safely possible. • Be aware of the direction of the wind and how it affects the flame. Usually you would want the wind at your back so that it blows the flame away from your body and not toward you.
TRICKS • Never light up until you are comfortable, practiced and confident with the prop without fire. • Take it easy for your first light-up, there's no rush to spin with fire. • Do not learn or practise new tricks when lit-up.
First Aid
In the case of an accident or burn, it's important to know the steps to take before it happens.
WHAT TO DO IF CLOTHING CATCHES FIRE
Follow DRSABCD
Danger - Response - Send for help - Airway - Breathing - CPR - Defibrillation
Remember STOP, DROP & ROLL
Stop the person from moving around.
Drop the person to the ground and cover or wrap them in a fire blanket, 100% cotton wet towel or similar, if available.
Roll the person along the ground until the flames are extinguished.
Extinguish any burning props and ensure the area is safe.
Manage the burn.
FOR ALL BURNS
If the burn is severe or if it involves the airway, call triple zero (000) for an ambulance.
As soon as possible, hold the burnt area under cool running water for 20 minutes.
Remove any clothing and jewellery from the burnt area, unless they are stuck to the burn.
Cover the burn with a light, loose nonstick dressing, preferably clean, dry, non-fluffy material (eg plastic cling film).
Continue to check the patient for shock, and treat if necessary.
Seek medical advice if the burn is larger than a 20 cent piece, or deep.
We use only quality materials to maximise safety, durability and fun. Now you are ready to light up and express your unique self, exploring your skills and becoming part of the worldwide fire community.
Items will be added to the cart and a discount for the bundle will be applied. To make changes, please empty the cart and start over.
I've made my own tools, tools for my Troupe, as well as sold fire & flow tools for 10+ years and this is the first tool I have ever purchased from someone else... Very happy with it!
S
Sarah
Love my staff <3
This staff is amazing!! I love it so much <3 The only thing I recommend is not getting a fusion as a beginner as it makes it just that little bit heavier. However, you can buy ends to attach the dragon spokes to.
Y
Yossi S
I love this staff
I love this product. This feels like something that can last me years. The EPDM grip is fantastic, but after about a month it's definitely wearing off.
J
Joe Monteleone
Product Arrived Unusable. Seller Not Responding. Money Wasted.
I discovered my collapsable fusion dragon staff had a wobble to it (it was bent). I was told it wasn’t covered under warranty so I purchased a new middle section. I received the new middle section, but there is still a bad wobble. I have now spent over $400 on a product that doesn't work. The seller is not responding even after I purchased a second item from them to fix the problem. I thought this company was so great too until now. So unfortunate. $400 wasted. Hopefully they get back to me so I can change this review.
Hi Joe, As mentioned in email we can't cover physical damage under warranty. If the staff arrived damaged we would cover it. Please get back to us via email and we can see what we can do to reduce the cost for the replacement. Thanks
M
Marisa Ferrante
I love my svetlana
I bought this contact dragon staff after being able to play with the exact one my friend had and, she’s amazing... like the grip, the weight, everything about her is so perfect, I’m a beginner and I know she’s gana teach me good :) I love you svetlana the dragon
